Erosion Problems And Solutions!
Erosion is the natural flow of action along the exterior most
surface of the ground. It is when wind or water carries the grains of sand,
pebbles, or even small rocks along with it to the lowest point of an area. It
is simply the transportation of earth from a weaker point to a more stable one,
forming level ground. Many factors affect the rate of erosion, it depending on
the speed and amount of wind/water flow, the steepness or elevation of an area,
vegetation, and even how loose or hard the surface is. Erosion control in Austin TX is a
growing need in residential and commercial building projects, here is a brief
description of what it is.
Why Is Erosion a Problem?
The time when erosion is of the most problem to us is usually in
architectural terms, it is either when a new building is being constructed, an
existing one is on the verge of collapsing or the risks of a landslide in a
residential area. While the risk of the landslide can never be prevented with
utmost certainty, there are many actions a construction company can take to
prevent the loss of money and soil erosion. The surface earth is loosened quite
a lot when the ground is being prepared for construction, the grating and
cutting of steep area alone causes the whole surface to become granular.
When construction companies do not take the necessary steps to
safeguard the ground cover of the area that is being prepared for construction,
it is very common then to observe large amounts of erosion on the steep sides
of the ground. Several precautionary measures can prevent this from sucking out
all the additional expenses to then fill out the land later on and adding even
more working hours for the ground to be ready for construction.
Erosion Control
The erosion control planning depends on the ground type and differs
for each type. The very first thing to keep in mind during construction to
prevent erosion is by not using the land beyond its capabilities. Planning according
to the load that area of land can take will prove to be much beneficial in the
years to come. Another common way is by channelizing the stormwater run-offs,
as it is through that where most of the erosion occurs. Installing silt filters
and vegetation across the stormwater runoff will give the ground a decent hold
on the small grains that are most susceptible to be carried by the water.
0 comments :
Post a Comment